Yatong High Capacity 20-63mm PE Pipe Extrusion Machine
Dual PVC pipe extrusion Machine is developed for high output of double pipe extrusion . the main machine can be SJSZ51/105 or SJSZ65/132 conical double screw extruder, which is equipped with double pipe mold , it avoids a waste condition when one pipe is adjusted and the onter one is affected .
Features : High capacity , easy operate and convenient to maintain
Main machines:
REMARK : if the equipment or technological parameters have some change , we shall not make a notice separately
Specification :
1- Screw & Barrel Material : 38CrMoALA
2- Electrical Part : a) Frequency Invertor : DELTA or CUSTOMIZED
b) Temperature Controller : OMRON
c) Contactor : SCHNEIDER
3- Raw Material : PVC , CPVC , UPVC
material Hopper Dryer and Auto charger → PE pipe extruder → marking line extruder → mould → calibrator → vacuum calibration tank → spray cooling water tank →printer → haul-off → cutter → pipe discharging rack
Dual PVC pipe extrusion Machine is developed for high output of double pipe extrusion . the main machine can be SJSZ51/105 or SJSZ65/132 conical double screw extruder, which is equipped with double pipe mold , it avoids a waste condition when one pipe is adjusted and the onter one is affected .
Features : High capacity , easy operate and convenient to maintain
Main machines:
| Technical Parameter | SJSZ65 Conical Twin Screw Extruder | Model | SJSZ51 |
| Screw diameter | 51/105mm | ||
| Screw nitriding depth | 0.5-0.7mm | ||
| Screw surface rigidity | HV800-900 | ||
| Direction of screw | Outwards contra-rotation | ||
| Screw speed | 1-32rpm | ||
| Screw effective length | 1070mm | ||
| Motor power | 18.5kw | ||
| Barrel Heating power | 11kw | ||
| Barrel heating zone | 4zones | ||
| Barrel cooling power | 0.25kw* 3zones | ||
| Gearbox | Rigidity gear surface , thrust bearing , low noise | ||
| Extrusion capacity | 80-120kg/h | ||
| Dual Pipe Vacuum Tank | Tank length | 6000mm | |
| Vacuum pump | 3kw | ||
| Water pump | 2.2kw*2pcs | ||
| Cooling way | Water spray cooling | ||
| Material | All elements contact with water is stainless steel | ||
| Dual Pipe Haul-off and Cutter | Traction way | Pedrail traction | |
| Traction motor | 0.75kw*4pcs | ||
| Traction length | 1500mm | ||
| Clamping way | pneumatic | ||
| Cutting motor | 1.1kw*2pcs | ||
| Control way | PLC control | ||
| Cutting pipe size | 20-50mm | ||
| Stack Rack | Length | 5000mm | |
| Working table material | Stainless steel | ||
| Power supply | 380V/50HZ or depending on customer requirement | ||
Specification :
1- Screw & Barrel Material : 38CrMoALA
2- Electrical Part : a) Frequency Invertor : DELTA or CUSTOMIZED
b) Temperature Controller : OMRON
c) Contactor : SCHNEIDER
3- Raw Material : PVC , CPVC , UPVC
